by Hillyer Coutaux
The cost of solar panels is very high so we chose to find out how to build solar panels strategies of our own. In order to run our off grid house we would require about 3000 watts of manufacturing power and that would cost us in excess of $10,000 to buy brand-new. Now I don't know about you but that is a lot of money for this family.
Building our own looked like a better option for us. All we had to do was determine where to find the parts we required and how to put them together. We had determined how to develop a wind generator before this, which ended up fantastic so we figured we can do this too.
Exactly what did we need?
Readily readily available and easy to follow plans
Easy to understand how to develop photovoltaic panels plans
Simple devices and a place to work
After some pondering and quite a bit of research we discovered a set of strategies that offered us with all the details we needed. Many of it dealt with how to install solar panels but there was a great area on the best ways to develop our own too. There were a area on where to find free photovoltaic panels when we got the 5 books together, in one called Renewable Energy Solutions.
We solved to it starting with a piece of plywood as a backer board on which to mount the individual cells. Since there is soldering that needs to be done and we such as working in a well ventilated area, we picked to work in our workshop. Keep that in mind when you start.
When needed too, I'm kind of a security mindful individual and constantly have been so we wear eye and hand protection.
Wires are soldered to the back of the cells, one for positive and one for unfavorable. We discovered the cells at the source pointed out in the guide.
Just a dab of solder and the wires are fished through holes in the plywood to the back.
Align the cells in rows so it's easier to set up later. They are attached to the plywood with a bit of silicone caulking- not too much or you'll have a mess on your hands.
The favorable lead wires you soldered earlier are all joined together to one main wire. The same is finished with the negative leads. Get these major wires out to the outside of the board then sandwich the whole back with another thin piece of plywood.
A bit of a spacer around the outdoors edge makes a excellent frame and keeps the wires from being ground.
We such as to put a sheet of tempered glass over top of the solar batteries too. Making use of a little trim the glass can be held in location nicely with some screws and silicone. When you are done, it looks real professional.
How much did we save?
All totaled up we can build a 100 watt solar panel for under $200 although costs tend to change, yours will too. That's about 30 % of the cost of buying brand-new ones.
Isn't it time you began now, let's start.
Just think about all the money you will conserve buy doing this job yourself. That skyrocketing electric bill will be a extinction. This is not a challenging procedure to learn and we are specific that anyone following the above directions can do a completely fine job of it.
Learning how to build your own solar panels is easier than most link with right information.
No comments:
Post a Comment